Primaries in aqueous phase

Products EMADOX® : A4   and  AB RUST® : NFP, A4

 

EMADOX® A4

Without V.O.C.
Corrosion inhibitor – Anti flash-rust additive

EMADOX® A4 is a corrosion inhibitor which contains sodium nitrite.

Advantages:
Very efficient on safes iron or steel supports: usual dosages of 0.2 to 1.0% of the total weight for anticorrosion primaries based on pure acrylic resins or modified, alkyd emulsion, two component epoxy.Convenient for the protection of aluminum.

To avoid the development and the rise of the rust through the paint film on bad stretched iron or steel supports: in this case, the incorporation rate must be over than: contact our technical support
Uses:
Anti flash-rust additive
Protection for metal packaging (boxes, buckets of paints and varnishes)

AB RUST® NFP

Without V.O.C. – without Nitrite
Compatible with the EUROPEAN ECOLABEL
Corrosion inhibitor- Anti flash-rust additive

AB RUST® NFP is a corrosion inhibitor without Nitrite for paints and varnishes.

Advantages:
Efficiency :Rates between 0.4 and 1.0% of the AB RUST® NFP additive from the total weight of the formulation permitted us to eliminate or to limit really significantly the phenomenon on steel supports freshly painted and exposed in atmosphere saturated in moisture for a period at least equal to the drying period to touch.

Versatility compared to resins:

L’AB RUST® NFP has shown in our laboratory tests a good chemical compatibility with binders based on resins:

  • Acrylic
  • Styrene-acrylic
  • Alkyd in emulsion
Versatility compared to metals:AB RUST® NFP protects ferrous metals, aluminum, zinc.
Uses:
Anti flash-rust additives
Protection for metal packaging (boxes, buckets of paints and varnishes)
Stability at low temperature: reversible crystallization on samples stored at -5°C and -10°C
It is recommended to store the AB RUST® NFP frost.

 

AB RUST® A4

Without V.O.C.
Corrosion inhibitor – Anti flash-rust additives

AB RUST® A4 is specially conceived for the protection of the ferrous metals in contact with formulations in aqueous phase.

Advantages:
– Coating in aqueous phase based on acrylic, styrene-acrylic or alkyd in emulsion resins in contact with iron and steels.
– Protection for metal packaging (boxes, buckets of paints and varnishes).
Uses:
Anti flash-rust additives
Protection for metal packaging (boxes, buckets of paints and varnishes)