AB RUST®FP is specifically designed to protect metal in contact with water based formulations.
AB RUST®FP is a ready to use aqueous solution made of organic based corrosion inhibitors.
AB RUST®FP is VOC* free, nitrite free and European Ecolabel* compliant.
The sustainable alternative with additives formulated from plant-based bases
AB RUST®FP is mainly recommended for:
AB RUST®FP must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.
Aspect: yellow liquid
Density: 1.09 – 1.19 at 20°C
pH: 7.8 – 8.8 at 20°C
Solubility: Water soluble in all proportions
AB RUST®FP can release an odour specific to its composition, even in the dry film, for a prolonged period of time.
AB RUST®FP is frost sensitive. It must be kept at temperature above 0°C. It is recommended to use AB RUST®FP within 2 years following its manufacture (see the expiration date on the label).
AB RUST®FP is not classified according to the Regulation EC N°1272/2008. For further information, please consult the MSDS.
AB RUST®FP components are registered on the following inventories: EINECS (Europe), ENCS and ISHL (Japan), KECI (South Korea), TCSI (Taiwan).
AB RUST®FP is active on steels, galvanized steels, aluminum.
AB RUST®FP is recommended for wood coatings. Its amine free formulation is an advantage to avoid the yellowing on the wood.
Polyethylene pails of 20 kg and 30 kg net
Metallic drums of 225 kg net
Polyethylene IBC of 1100 kg net
Non-returnable packages.
*VOC: volatile organic compounds defined by the Directive 2004/42/EC
*European Ecolabel: see Commission Decision 2014/312/EU