Applications - Dosage
EMADOX®WR 14 is mainly recommended for:
- flash-rust protection of water based formulations based on acrylic, alkyd, epoxy polyurethane dispersions or emulsions.
- in-can protection for metal packaging filled with above products
EMADOX®WR 14 must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The typical use levels are:
- 1.0 to 1.5% based on the total weight
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.