EMADOX® NA v3

Home - EMADOX® - EMADOX® NA v3

EMADOX® NA v3

High performance

EMADOX-ICP-protege-du-flash-rust

EMADOX®NA v3 protects the water based formulations (coatings, paints and varnishes) from the flash-rust phenomenon observed during the application and drying stages.

EMADOX®NA v3 is a ready to use aqueous solution combining several corrosion inhibitors.

EMADOX®NA v3 is VOC* free.

Applications - Dosage

EMADOX®NA v3 is mainly recommended for:

  • Water based anti-corrosive primers based on pure or modified acrylic binders (styrene – vinyl), polyurethane, one and two-pack epoxy.

EMADOX®NA v3 must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:

  • From 0.2 % based on the total weight

There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.

Characteristics

Aspect: Liquid, slightly yellow, non foaming
Density: 1.12 – 1.22 at 20°C
pH: 8.0 – 8.6 at 20°C
Solubility: Water soluble in all proportions

Storage - Shelf-life

EMADOX®NA v3 is frost sensitive. It must be kept at temperature above 0°C.

It is recommended to use EMADOX®NA v3 within 2 years following its manufacture (see the expiration date on the label).

Labeling

EMADOX®NA v3 is classified according to Regulation (EC) No. 1272/2008 [CLP].
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
For further information, please consult the MSDS.

Regulatory information

EMADOX®NA v3 components are registered on the following inventories: EINECS (Europe), ENCS and ISHL (Japan), KECI (South Korea), TCSI (Taiwan).

Comments

EMADOX®NA v3 is active on iron, cast iron and steels.

Packagings

Polyethylene pails of 20 kg and 30 kg net
Metallic drums of 225 kg net
Polyethylene IBC of 1100 kg net
Non-returnable packages.